191X Hazardous Location Steady Burning Light

• 24 to 250 VAC/VDC
• Six tempered glass dome colors
• Uses standard A-19 incandescent lamp (40W-100W)
• 3/4-inch pipe mount
• Dome Guard included
• Indoor/outdoor use
• Type 4X, IP66 enclosure
• UL and cUL Listed, CSA Certified

Federal Signal's Model 191X hazardous location steady burning light is rated for operation with any voltage from 24 to 250 VAC or VDC. The user determines the voltage based on the lamp used. The fixture will accommodate lamps up to an 100 watt/A-19 (user supplied).

The Model 191X is UL Listed and CSA Certified for Class I, Division 2, Groups A, B, C and D; Class II, Division 1 and 2, Groups E and F.

The 191X has been certified by UL as meeting Type 4X water-tight and corrosion-resistant requirements and is constructed to meet IP66. This hazardous location steady burning light has an aluminum base ready for mounting on a 3/4-inch pipe. The base features electrostatically applied (e-coated) epoxy paint for corrosion-resistance. A dome guard fits over the glass dome to protect it against accidental collision with moving equipment, such as forklifts.

To determine the proper lamp wattage and wire insulation rating for a specific application, refer to the Operating Temperature Chart on the Cutsheet. Model 191X is available in six dome colors - amber, blue, clear, green, magenta, and red. 

Federal Signal's Model 191X steady burning light is designed for hazardous locations where a visual signal is needed. This fixture can be used for status indication or area lighting on offshore oil rigs, in mines, and in refineries.